Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server.

 

Resolution:

1) Ensure that the TCP/IP protocol is installed on your RAS server and that the TCP/IP protocol is selected in the Server Settings of the Network Configuration option of the Remote Access Setup dialog.

2) If you have the "Use DHCP to assign remote TCP/IP client addresses" option selected for the TCP/IP protocol in the RAS Server Settings, then ensure that you have installed DHCP and that it is not disabled.

3) Ensure that all of the bindings for TCP/IP are enabled in the Bindings tab of the Network dialog of the Control Panel. Be sure to inspect the TCP/IP Protocol and WINS Client (TCP/IP) bindings for all adapters, all protocols, and all services. If the TCP/IP bindings are corrupt, you may have to reinstall TCP/IP and or RAS in order to clean up the bindings.

  • Email, SSL
  • 0 Users Found This Useful
Was this answer helpful?

Related Articles

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete...

Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer...

Error 624

Error 624:  Cannot update the phonebook file.   Resolutions: 1)  Make sure that RASPHONE.PBK...

Error 629

  Error 629 - The port was disconnected by the remote machine (also re: error 913).   Check...

Error 630

Error 630 - The port was disconnected due to hardware failure   1. Check that the modem is...

Powered by WHMCompleteSolution