Error 800

Error 800: Unable to establish the VPN connection. The VPN server may be un-reachable, or security parameters may not be configured properly for this connection.

 

Resolutions:

1) if you have firewall, open TCP Port 1723, IP Protocol 47 (GRE).

2) make sure you can reach the VPN server by using ping.  Sometimes, poor connection can cause this issue too.

3) You may need to updated firmware on a router or firewall if other OS (win9x/nt/me/w2k) works except XP.

4) The VPN server may not be able to get IP from DHCP for the VPN client. So, you may want to re-configure VPN host networking settings. For XP pro VPN host, go to the Properties of the VPN>Network, check Specify TCP/IP address and Allow calling computer to specify its own IP address, and uncheck Assign TCP/IP addresses automatically using DHCP.

5) Make sure no other secure software blocks your access, for example, if you use Norton secure software, you may need to add the remote client's IP so that the client can access.

6) If your VPN running on a Windows RRAS with NAT enabled, you may want to check the NAT settings.

7) If you can establish the VPN from the desktop at home but not from the laptop. Make sure no security software like Microsoft OneCare software that blocks the GRE.

  • Email, SSL
  • 0 Users Found This Useful
Was this answer helpful?

Related Articles

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete...

Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer...

Error 624

Error 624:  Cannot update the phonebook file.   Resolutions: 1)  Make sure that RASPHONE.PBK...

Error 629

  Error 629 - The port was disconnected by the remote machine (also re: error 913).   Check...

Error 630

Error 630 - The port was disconnected due to hardware failure   1. Check that the modem is...

Powered by WHMCompleteSolution