Error 630

Error 630 - The port was disconnected due to hardware failure

 

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.

2. Check  if your modem is being given a bad init string - with a command that it does not support.

3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.

4. Reboot your computer and try it again.

5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.

6. Update the modem drivers.

  • Email, SSL
  • 0 Bu mövzunu faydalı görən istifadəçilər:
Bu mövzu kifayət qədər köməkçi oldu?

Related Articles

Error 720

Error 720: No PPP control protocols configured.   Resolution: 1) make sure both RAS server...

Error 650

Error 650:  The Remote Access server is not responding.   Resolution: 1) Proxy or firewall...

Error 645

Error 645:  Internal authentication error (also re:  error 913), or  Dial-Up Networking could...

Error 741

Error 741 - The local computer does not support the required encryption type   1. Make sure...

Error 769

Error 769 The specific destination is not reachable. Cause: 1. The network card in your...

Powered by WHMCompleteSolution