Error 630

Error 630 - The port was disconnected due to hardware failure

 

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.

2. Check  if your modem is being given a bad init string - with a command that it does not support.

3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.

4. Reboot your computer and try it again.

5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.

6. Update the modem drivers.

  • Email, SSL
  • 0 Uživatelům pomohlo
Byla tato odpověď nápomocná?

Related Articles

Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for...

Error 732

Error 732: The PPP negotiation is not converging.   Cause:   1. The negotiation of PPP...

Error 721

Error 721: Remote PPP peer or computer is not responding.   Resolution: If you have tried...

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....

Error 645

Error 645:  Internal authentication error (also re:  error 913), or  Dial-Up Networking could...

Powered by WHMCompleteSolution