Error 630

Error 630 - The port was disconnected due to hardware failure

 

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.

2. Check  if your modem is being given a bad init string - with a command that it does not support.

3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.

4. Reboot your computer and try it again.

5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.

6. Update the modem drivers.

  • Email, SSL
  • 0 Kunder som kunne bruge dette svar
Hjalp dette svar dig?

Related Articles

Error 732

Error 732: The PPP negotiation is not converging.   Cause:   1. The negotiation of PPP...

Error 800

Error 800: Unable to establish the VPN connection. The VPN server may be un-reachable, or...

Error 645

Error 645:  Internal authentication error (also re:  error 913), or  Dial-Up Networking could...

Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive...

Error 682

Error 682:  When VPN clients try to remotely log on to your network, they may be denied access....

Powered by WHMCompleteSolution