Error 630

Error 630 - The port was disconnected due to hardware failure

 

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.

2. Check  if your modem is being given a bad init string - with a command that it does not support.

3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.

4. Reboot your computer and try it again.

5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.

6. Update the modem drivers.

  • Email, SSL
  • 0 Gebruikers die dit nuttig vonden
Was dit antwoord nuttig?

Related Articles

Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer...

Error 721

Error 721: Remote PPP peer or computer is not responding.   Resolution: If you have tried...

Error 783

Error 783 - Can't enable ICS   Symptom: When you try to enable ICS, you may receive the...

Error 734

Error 734 - The PPP link control protocol terminated.   Resolutions: 1. this is most like...

Error 797

Error 797 -  The modem could not be found.   Resolutions: 1. Rebooting the machine that may...

Powered by WHMCompleteSolution