Error 630

Error 630 - The port was disconnected due to hardware failure

 

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.

2. Check  if your modem is being given a bad init string - with a command that it does not support.

3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.

4. Reboot your computer and try it again.

5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.

6. Update the modem drivers.

Kas see vastus oli kasulik?

 Prindi artikkel

Loe veel

Error 783

Error 783 - Can't enable ICS   Symptom: When you try to enable ICS, you may receive the...

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....

Error 930

Error 930:  The authentication server did not respond to authentication requests in a timely...

Error 769

Error 769 The specific destination is not reachable. Cause: 1. The network card in your...

Error 691

Error 691: Access denied because username and/or password is invalid on the domain....

Powered by WHMCompleteSolution