Error 630

Error 630 - The port was disconnected due to hardware failure

 

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.

2. Check  if your modem is being given a bad init string - with a command that it does not support.

3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.

4. Reboot your computer and try it again.

5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.

6. Update the modem drivers.

  • Email, SSL
  • 0 Utilisateurs l'ont trouvée utile
Cette réponse était-elle pertinente?

Related Articles

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete...

Error 783

Error 783 - Can't enable ICS   Symptom: When you try to enable ICS, you may receive the...

Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer...

Error 741

Error 741 - The local computer does not support the required encryption type   1. Make sure...

Error 806

Error 806:  a connection between your computer and the VPN server has been established but the...

Powered by WHMCompleteSolution