Error 630

Error 630 - The port was disconnected due to hardware failure

 

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.

2. Check  if your modem is being given a bad init string - with a command that it does not support.

3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.

4. Reboot your computer and try it again.

5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.

6. Update the modem drivers.

  • Email, SSL
  • 0 A felhasználók hasznosnak találták ezt
Hasznosnak találta ezt a választ?

Related Articles

Error 734

Error 734 - The PPP link control protocol terminated.   Resolutions: 1. this is most like...

Error 682

Error 682:  When VPN clients try to remotely log on to your network, they may be denied access....

Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive...

Error 650

Error 650:  The Remote Access server is not responding.   Resolution: 1) Proxy or firewall...

Error 741

Error 741 - The local computer does not support the required encryption type   1. Make sure...

Powered by WHMCompleteSolution