Error 630

Error 630 - The port was disconnected due to hardware failure

 

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.

2. Check  if your modem is being given a bad init string - with a command that it does not support.

3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.

4. Reboot your computer and try it again.

5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.

6. Update the modem drivers.

  • Email, SSL
  • 0 Utenti hanno trovato utile questa risposta
Hai trovato questa risposta utile?

Related Articles

Error 781

Error 781 - Encryption Failed   Symptom: When connecting to a VPN server, you may receive...

Error 678

Error 678: There was not answer.   Resolution: 1) you are dialing the wrong number. 2) make...

Error 937

Error 937: Because another connection of your type is in use.   Cause: W2K/XP limits one VPN...

Error 720

Error 720: No PPP control protocols configured.   Resolution: 1) make sure both RAS server...

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....

Powered by WHMCompleteSolution