Error 630

Error 630 - The port was disconnected due to hardware failure

 

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.

2. Check  if your modem is being given a bad init string - with a command that it does not support.

3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.

4. Reboot your computer and try it again.

5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.

6. Update the modem drivers.

  • Email, SSL
  • 0 Usuários acharam útil
Esta resposta lhe foi útil?

Related Articles

Error 800

Error 800: Unable to establish the VPN connection. The VPN server may be un-reachable, or...

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete...

Error 734

Error 734 - The PPP link control protocol terminated.   Resolutions: 1. this is most like...

Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for...

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....

Powered by WHMCompleteSolution