Error 630

Error 630 - The port was disconnected due to hardware failure

 

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.

2. Check  if your modem is being given a bad init string - with a command that it does not support.

3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.

4. Reboot your computer and try it again.

5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.

6. Update the modem drivers.

  • Email, SSL
  • 0 Пользователи нашли это полезным
Помог ли вам данный ответ?

Related Articles

Error 645

Error 645:  Internal authentication error (also re:  error 913), or  Dial-Up Networking could...

Error 930

Error 930:  The authentication server did not respond to authentication requests in a timely...

Error 781

Error 781 - Encryption Failed   Symptom: When connecting to a VPN server, you may receive...

Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for...

Error 720

Error 720: No PPP control protocols configured.   Resolution: 1) make sure both RAS server...

Powered by WHMCompleteSolution