Error 630

Error 630 - The port was disconnected due to hardware failure

 

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.

2. Check  if your modem is being given a bad init string - with a command that it does not support.

3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.

4. Reboot your computer and try it again.

5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.

6. Update the modem drivers.

  • Email, SSL
  • 0 Los Usuarios han Encontrado Esto Útil
¿Fue útil la respuesta?

Related Articles

Error 720

Error 720: No PPP control protocols configured.   Resolution: 1) make sure both RAS server...

Error 735

Error 735 - The requested address was rejected by server.   Make sure you don't setup static...

Error 645

Error 645:  Internal authentication error (also re:  error 913), or  Dial-Up Networking could...

Error 781

Error 781 - Encryption Failed   Symptom: When connecting to a VPN server, you may receive...

Error 734

Error 734 - The PPP link control protocol terminated.   Resolutions: 1. this is most like...

Powered by WHMCompleteSolution