Error 630

Error 630 - The port was disconnected due to hardware failure

 

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.

2. Check  if your modem is being given a bad init string - with a command that it does not support.

3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.

4. Reboot your computer and try it again.

5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.

6. Update the modem drivers.

  • Email, SSL
  • 0 användare blev hjälpta av detta svar
Hjälpte svaret dig?

Related Articles

Error 721

Error 721: Remote PPP peer or computer is not responding.   Resolution: If you have tried...

Error 769

Error 769 The specific destination is not reachable. Cause: 1. The network card in your...

Error 783

Error 783 - Can't enable ICS   Symptom: When you try to enable ICS, you may receive the...

Error 645

Error 645:  Internal authentication error (also re:  error 913), or  Dial-Up Networking could...

Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer...

Powered by WHMCompleteSolution