Error 630

Error 630 - The port was disconnected due to hardware failure

 

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.

2. Check  if your modem is being given a bad init string - with a command that it does not support.

3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.

4. Reboot your computer and try it again.

5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.

6. Update the modem drivers.

  • Email, SSL
  • 0 Bu dökümanı faydalı bulan kullanıcılar:
Bu cevap yeterince yardımcı oldu mu?

Related Articles

Error 732

Error 732: The PPP negotiation is not converging.   Cause:   1. The negotiation of PPP...

Error 800

Error 800: Unable to establish the VPN connection. The VPN server may be un-reachable, or...

Error 769

Error 769 The specific destination is not reachable. Cause: 1. The network card in your...

Error 720

Error 720: No PPP control protocols configured.   Resolution: 1) make sure both RAS server...

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete...

Powered by WHMCompleteSolution