Error 630

Error 630 - The port was disconnected due to hardware failure

 

1. Check that the modem is plugged in, and if necessary, turn the modem off, and then turn it back on.

2. Check  if your modem is being given a bad init string - with a command that it does not support.

3. Check if another program is already using the modem, or, if the modem or serial port's resources configuration is incorrect.

4. Reboot your computer and try it again.

5. If that doesn’t work, go to Start -> Settings -> Control Panel -> Modems -> Diagnostics and get More Info from your modem. If it fails, your modem driver is corrupt and needs to be re-installed.

6. Update the modem drivers.

  • Email, SSL
  • 0 Користувачі, які знайшли це корисним
Ця відповідь Вам допомогла?

Related Articles

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete...

Error 783

Error 783 - Can't enable ICS   Symptom: When you try to enable ICS, you may receive the...

Error 650

Error 650:  The Remote Access server is not responding.   Resolution: 1) Proxy or firewall...

Error 769

Error 769 The specific destination is not reachable. Cause: 1. The network card in your...

Error 736

Error 736 - The remote computer terminated the control protocol.   1. This error indicated...

Powered by WHMCompleteSolution