Error 633

Error 633 Modem Is Already in Use

Symptoms: When you try to use your modem on a Windows computer, you may receive an error message similar to the following: Error 633 Modem is already in use, or is not configured for Remote Access dial out or The port is in use.

 

Resolutions: 1. Verify  no other applications that are using the modem. You can open  Task Manager to check that by press  CTRL+ALT+DEL.  Another way to test it is reboot the computer.

2. This behavior may occur when another device with a driver,  for example outdated Palm Pilot software, conflicts with the modem.

3. Telephone.ini or unimdm.tsp is missing or damaged.

4. Make sure the modem is setup correctly and may apply SP.

5. Removing and reinstalling it, or  apply the new drive may fix the problem.

6. Make sure no two ISDN installed on the same machine and attempt to connect to the same server.

  • Email, SSL
  • 0 Bu mövzunu faydalı görən istifadəçilər:
Bu mövzu kifayət qədər köməkçi oldu?

Related Articles

Error 645

Error 645:  Internal authentication error (also re:  error 913), or  Dial-Up Networking could...

Error 741

Error 741 - The local computer does not support the required encryption type   1. Make sure...

Error 721

Error 721: Remote PPP peer or computer is not responding.   Resolution: If you have tried...

Error 678

Error 678: There was not answer.   Resolution: 1) you are dialing the wrong number. 2) make...

Error 720

Error 720: No PPP control protocols configured.   Resolution: 1) make sure both RAS server...

Powered by WHMCompleteSolution