Error 633

Error 633 Modem Is Already in Use

Symptoms: When you try to use your modem on a Windows computer, you may receive an error message similar to the following: Error 633 Modem is already in use, or is not configured for Remote Access dial out or The port is in use.

 

Resolutions: 1. Verify  no other applications that are using the modem. You can open  Task Manager to check that by press  CTRL+ALT+DEL.  Another way to test it is reboot the computer.

2. This behavior may occur when another device with a driver,  for example outdated Palm Pilot software, conflicts with the modem.

3. Telephone.ini or unimdm.tsp is missing or damaged.

4. Make sure the modem is setup correctly and may apply SP.

5. Removing and reinstalling it, or  apply the new drive may fix the problem.

6. Make sure no two ISDN installed on the same machine and attempt to connect to the same server.

  • Email, SSL
  • 0 Kunder som kunne bruge dette svar
Hjalp dette svar dig?

Related Articles

Error 711

Error 711:  When attempting to start the Routing and Remote Access Service, you may receive...

Error 630

Error 630 - The port was disconnected due to hardware failure   1. Check that the modem is...

Error 930

Error 930:  The authentication server did not respond to authentication requests in a timely...

Error 732

Error 732: The PPP negotiation is not converging.   Cause:   1. The negotiation of PPP...

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....

Powered by WHMCompleteSolution