Error 633

Error 633 Modem Is Already in Use

Symptoms: When you try to use your modem on a Windows computer, you may receive an error message similar to the following: Error 633 Modem is already in use, or is not configured for Remote Access dial out or The port is in use.

 

Resolutions: 1. Verify  no other applications that are using the modem. You can open  Task Manager to check that by press  CTRL+ALT+DEL.  Another way to test it is reboot the computer.

2. This behavior may occur when another device with a driver,  for example outdated Palm Pilot software, conflicts with the modem.

3. Telephone.ini or unimdm.tsp is missing or damaged.

4. Make sure the modem is setup correctly and may apply SP.

5. Removing and reinstalling it, or  apply the new drive may fix the problem.

6. Make sure no two ISDN installed on the same machine and attempt to connect to the same server.

  • Email, SSL
  • 0 Gebruikers die dit nuttig vonden
Was dit antwoord nuttig?

Related Articles

Error 734

Error 734 - The PPP link control protocol terminated.   Resolutions: 1. this is most like...

Error 937

Error 937: Because another connection of your type is in use.   Cause: W2K/XP limits one VPN...

Error 619

Error 619: 1. The port was disconnected (or  Error 645, Dial-Up Networking could not complete...

Error 735

Error 735 - The requested address was rejected by server.   Make sure you don't setup static...

Error 628

Error 628:  The port is disconnected or The connection was terminated by the remote computer...

Powered by WHMCompleteSolution