Error 633

Error 633 Modem Is Already in Use

Symptoms: When you try to use your modem on a Windows computer, you may receive an error message similar to the following: Error 633 Modem is already in use, or is not configured for Remote Access dial out or The port is in use.

 

Resolutions: 1. Verify  no other applications that are using the modem. You can open  Task Manager to check that by press  CTRL+ALT+DEL.  Another way to test it is reboot the computer.

2. This behavior may occur when another device with a driver,  for example outdated Palm Pilot software, conflicts with the modem.

3. Telephone.ini or unimdm.tsp is missing or damaged.

4. Make sure the modem is setup correctly and may apply SP.

5. Removing and reinstalling it, or  apply the new drive may fix the problem.

6. Make sure no two ISDN installed on the same machine and attempt to connect to the same server.

  • Email, SSL
  • 0 Kasutajad peavad seda kasulikuks
Kas see vastus oli kasulik?

Related Articles

Error 736

Error 736 - The remote computer terminated the control protocol.   1. This error indicated...

Error 650

Error 650:  The Remote Access server is not responding.   Resolution: 1) Proxy or firewall...

Error 630

Error 630 - The port was disconnected due to hardware failure   1. Check that the modem is...

Error 649

Error 649.  The account does not have permission to dial-in.   Resolution: 1) This error can...

Error 769

Error 769 The specific destination is not reachable. Cause: 1. The network card in your...

Powered by WHMCompleteSolution