Error 633

Error 633 Modem Is Already in Use

Symptoms: When you try to use your modem on a Windows computer, you may receive an error message similar to the following: Error 633 Modem is already in use, or is not configured for Remote Access dial out or The port is in use.

 

Resolutions: 1. Verify  no other applications that are using the modem. You can open  Task Manager to check that by press  CTRL+ALT+DEL.  Another way to test it is reboot the computer.

2. This behavior may occur when another device with a driver,  for example outdated Palm Pilot software, conflicts with the modem.

3. Telephone.ini or unimdm.tsp is missing or damaged.

4. Make sure the modem is setup correctly and may apply SP.

5. Removing and reinstalling it, or  apply the new drive may fix the problem.

6. Make sure no two ISDN installed on the same machine and attempt to connect to the same server.

  • Email, SSL
  • 0 A felhasználók hasznosnak találták ezt
Hasznosnak találta ezt a választ?

Related Articles

Error 734

Error 734 - The PPP link control protocol terminated.   Resolutions: 1. this is most like...

Error 630

Error 630 - The port was disconnected due to hardware failure   1. Check that the modem is...

Error 937

Error 937: Because another connection of your type is in use.   Cause: W2K/XP limits one VPN...

Error 769

Error 769 The specific destination is not reachable. Cause: 1. The network card in your...

Error 629

  Error 629 - The port was disconnected by the remote machine (also re: error 913).   Check...

Powered by WHMCompleteSolution