Error 633

Error 633 Modem Is Already in Use

Symptoms: When you try to use your modem on a Windows computer, you may receive an error message similar to the following: Error 633 Modem is already in use, or is not configured for Remote Access dial out or The port is in use.

 

Resolutions: 1. Verify  no other applications that are using the modem. You can open  Task Manager to check that by press  CTRL+ALT+DEL.  Another way to test it is reboot the computer.

2. This behavior may occur when another device with a driver,  for example outdated Palm Pilot software, conflicts with the modem.

3. Telephone.ini or unimdm.tsp is missing or damaged.

4. Make sure the modem is setup correctly and may apply SP.

5. Removing and reinstalling it, or  apply the new drive may fix the problem.

6. Make sure no two ISDN installed on the same machine and attempt to connect to the same server.

  • Email, SSL
  • 0 Корисниците го најдоа ова како корисно
Дали Ви помогна овој одговор?

Related Articles

Error 797

Error 797 -  The modem could not be found.   Resolutions: 1. Rebooting the machine that may...

Error 630

Error 630 - The port was disconnected due to hardware failure   1. Check that the modem is...

Error 678

Error 678: There was not answer.   Resolution: 1) you are dialing the wrong number. 2) make...

Error 792

Error 792 -   The L2TP Connection Attempt failed because security negotiation timed out....

Error 783

Error 783 - Can't enable ICS   Symptom: When you try to enable ICS, you may receive the...

Powered by WHMCompleteSolution