Error 633

Error 633 Modem Is Already in Use

Symptoms: When you try to use your modem on a Windows computer, you may receive an error message similar to the following: Error 633 Modem is already in use, or is not configured for Remote Access dial out or The port is in use.

 

Resolutions: 1. Verify  no other applications that are using the modem. You can open  Task Manager to check that by press  CTRL+ALT+DEL.  Another way to test it is reboot the computer.

2. This behavior may occur when another device with a driver,  for example outdated Palm Pilot software, conflicts with the modem.

3. Telephone.ini or unimdm.tsp is missing or damaged.

4. Make sure the modem is setup correctly and may apply SP.

5. Removing and reinstalling it, or  apply the new drive may fix the problem.

6. Make sure no two ISDN installed on the same machine and attempt to connect to the same server.

  • Email, SSL
  • 0 Usuários acharam útil
Esta resposta lhe foi útil?

Related Articles

Error 678

Error 678: There was not answer.   Resolution: 1) you are dialing the wrong number. 2) make...

Error 792

Error 792 -   The L2TP Connection Attempt failed because security negotiation timed out....

Error 734

Error 734 - The PPP link control protocol terminated.   Resolutions: 1. this is most like...

Error 913

Error 913:  A Remote Access Client attempted to connect over a port that was reserved for...

Error 735

Error 735 - The requested address was rejected by server.   Make sure you don't setup static...

Powered by WHMCompleteSolution