Error 633

Error 633 Modem Is Already in Use

Symptoms: When you try to use your modem on a Windows computer, you may receive an error message similar to the following: Error 633 Modem is already in use, or is not configured for Remote Access dial out or The port is in use.

 

Resolutions: 1. Verify  no other applications that are using the modem. You can open  Task Manager to check that by press  CTRL+ALT+DEL.  Another way to test it is reboot the computer.

2. This behavior may occur when another device with a driver,  for example outdated Palm Pilot software, conflicts with the modem.

3. Telephone.ini or unimdm.tsp is missing or damaged.

4. Make sure the modem is setup correctly and may apply SP.

5. Removing and reinstalling it, or  apply the new drive may fix the problem.

6. Make sure no two ISDN installed on the same machine and attempt to connect to the same server.

  • Email, SSL
  • 0 användare blev hjälpta av detta svar
Hjälpte svaret dig?

Related Articles

Error 736

Error 736 - The remote computer terminated the control protocol.   1. This error indicated...

Error 733

Error 733:  the PPP control protocol for this network protocol is not available on the server....

Error 720

Error 720: No PPP control protocols configured.   Resolution: 1) make sure both RAS server...

Error 783

Error 783 - Can't enable ICS   Symptom: When you try to enable ICS, you may receive the...

Error 630

Error 630 - The port was disconnected due to hardware failure   1. Check that the modem is...

Powered by WHMCompleteSolution